bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Horse Trailer Accessories


  • Spare Tire Cover for 265/75-16 Tire Size on Horse Trailer
  • The 265/75-16 spare tire on your horse trailer will have an overall diameter of approximately 31.6-inches. For reference, the way to calculate this dimension based on standard tire size designations is explained in the linked article. I have included a link to our main page for all tire covers that fit 32-inch tires. You have many color options. A good cost-effective choice is the Classic Accessories Universal Fit Spare Tire Cover # 052963753875.
    view full answer...

  • How to Install Stairs for Lance 835 Truck Bed Camper That Are Usable When a Trailer Is Hitched
  • We offer a range of accessory steps for trucks which include hitch-mount, tailgate-mount and other types that can be seen on the link provided. Since you want to be able to install a step for entry into your camper while your horse trailer is hitched you have a bit of a challenge but we do have a solution for you. If you have a 2-inch receiver on your truck and if your trailer does not weigh more than 7500-lbs you can use the Curt Multipurpose Ball Mount # D210 in the truck's receiver....
    view full answer...

  • Availability of a 12 Inch Wide by 24 Inch Long Enclosed Horse Trailer Pad
  • I have included a link to all of the trailer pads we carry below. We do not have an exact match for a 12 inch by 24 inch pad, but the closest is the Horse Trailer Breast Pad, # HTP24BK, that you have referenced which is 9 inches wide by 24 inches long. Another option would be to use 3 Horse Trailer Escape Door Pads, # HTP12BK, and turn them 90 degrees so they would be 12 inches wide and 27 inches long when mounted right next to each other.
    view full answer...

  • Availability of Black Weather Stripping for Use on Horse Trailer
  • We do offer weather stripping for trailer doors and windows that includes a self-adhesive backing. In a 1/2-inch-width we have part # WS1412 which comes as a 45-foot roll. In a 3/4-inch-width we have part # WS1434 that comes as a 50-foot roll. For you reference I have lined you to our main page for all horse trailer parts.
    view full answer...

  • Horse Trailer Side Pad Size Availability And Manufacturer
  • We have added the 60" X 12" Pad # HTP1260BK since the particular answer page you found was made. We do have the 40" X 9" Pad # HTP40BK and 60" X 9" Pad # HTP60BK. These are all made by Redline with Redneck Trailer Supply being the distributor for them. We also have their Horse Trailer Escape Door Pad # HTP12BK that is 12" X 9" and Horse Trailer Breast Pad # HTP24BK that is 24" X 9".
    view full answer...

  • Mounting Screws for Installing Pads in Horse Trailer
  • Our horse trailer pad items such as 60-inch Side Pad # HTP60BK and 24-inch Breast Pad # HTP24BK don't come with included hardware because the requirements between different trailers can vary so much depending on the type of material the pads are mounted on. But we do offer a number 8 screw 3/4-inches long that has a finishing washer on it, part # PS-8. If this 3/4-inch length is suitable for your trailer then this is an excellent option. These are sold individually (qty of 1).
    view full answer...

  • Availability of Rubber Bumper For Horse Trailer Window
  • We have a replacement plunger sockets that could potentially work for your horse trailer window. Check out the Nylon Replacement Socket part # DH600S. This part can also be used on windows and measures 7/8 of an inch tall. For a socket door holder and plunger you will want part # DH604. I have included a video review of this pat for you to check out as well.
    view full answer...

  • Keyed Alike Option for Cam Latches on Horse Trailers
  • I have a solution for you, but the Bauer Products Locking Cam Latch for Horse Trailers, # BA32FR does not have a keyed alike option. I recommend the Global Link Vise Lock for Cam-Action Door Latches, # 295-000024 that does provide the keyed alike option. This is an aluminum construction with a black powder coat finish and can be keyed alike to match other Global Link locks too, not just matching cam locks. So if you have other locks on your trailer aside from the cam locks, please consider...
    view full answer...

  • Correct Replacement Wheel Bearings and Hub Assemblies For 2017 Trailer West 2 Horse Adventure Mx
  • Thanks for the pictures! For your 2017 Trailer West 2 Horse Adventure MX you will need the replacement hub and drum assembly # 84656UC3-EZ if your trailer has the optional 6 lug wheels, or # AKHD-545-35-EZ-K if your wheels have the 5 on 4-1/2" bolt pattern instead. Both hubs use AND include the same inner bearing # L68149 and outer bearing # L44649 along with grease seal # RG06-050. They also include a grease cap, and lug nuts. Your trailer uses the same hubs for the front and rear axles,...
    view full answer...

  • Powered Landing Gear, Single Unit, Recommendation For Horse Trailer
  • We have the Bulldog Velocity Series Electric Landing Gear Jack, # BD185400 that comes in a single unit. This is rated at 12,000 lbs.
    view full answer...

  • Replacement ID Bar Light Recommendation for Horse Trailer
  • You can hit reply to this email with the picture and I'll take a look.
    view full answer...

  • Air Ride Suspension for 5th Wheel, Gooseneck or Horse Trailer
  • There is a kit for a 5th wheel trailer, gooseneck trailer, horse trailer or any other RV that is similar to air bags, the Lippert Components Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle # LC1565391 or Triple Axle # LC1565401. Like an air bag kit for a truck, the Trailair Air-Ride Suspension is going to immediately enhance the ride of your trailer, giving you a much smoother, more relaxed towing experience. This system is going to take all of that harsh back and forth...
    view full answer...

  • One Inch Wide Trim For Horse Trailer
  • My contact at Redline told me that the outside diameter of the Chrome Trim # SA1012ET would be right at 5/16 of an inch and the inner diameter 1/8 of an inch. He said the trim isn't a perfect circle so the dimensions fluctuate a little bit. Unfortunately this will not work unless you want to do a custom installation with rolled trim stacked. We don't have any trim that will fit your horse trailer in chrome, but I do have the Camco RV Vinyl Trim Insert - Black - 100' Long x 1" Wide # CAM25212...
    view full answer...

  • Repair Parts and Replacement Jack for 2000 Sundowner 2-Horse Gooseneck Trailer
  • We do offer repair kits for many jack types, brands and models but we do not have a way to look up the specific brand and model of jack on your 2000 Sundowner gooseneck. From my research it appears most of the 2-horse gooseneck trailers from Sundowner used a single square jack, like the Bulldog 10K square jack # BD182804. This is a weld-on jack. We also have a Bulldog bolt-on 12V electric jack, part # BD185400 rated for 12K. If you can find brand and specific jack model information on...
    view full answer...

  • Interior Light Availability for Horse Trailer Living Quarters
  • The SAE number on the lens of a light isn't a part number so it's pretty hard to pick out the correct replacement light based just on it. The best option I would have for you would be to check out the link I attached that has all of the interior trailer lights we offer and pick out one that is as close to what you have or one that you think would work better.
    view full answer...

  • Could Ribbed Rubber Trailer Mat # 3622RM be Used in Trailer with ATVs and Cars
  • Yes the Ribbed Rubber Trailer Mat # 3622RM will hold up well for the application you mentioned. It's designed for horse trailer which will have all of the things you mentioned on them (minus gasoline) as well as have incredibly heavy horses moving around on them so it will work well for you.
    view full answer...

  • Solution for Trailer that Sits Nose High and Bounces on Highway
  • If a gooseneck trailer isn't sitting level you end up putting the trailer suspension in a situation that doesn't allow it to function properly which will then make it perform strangely like you mentioned. The best solution we can offer is a lift kit for the trailer so that it can sit level and still have the clearance you need like with the Correct Track part # RR23QX and you'd be set.
    view full answer...

  • Availability of a Door Handle for a 2007 Circle J Horse Trailer
  • Yes, we currently offer a couple door handles that could would work with your 2007 Circle J horse trailer. If you are looking for a rear door handle, the Redline lock bar assembly # 305736. It's has a 36 inch long pipe. Or the Redline # 3057-55. It will have a 55 inch long pipe. If you are looking for side door locks, the Redline locking steel flush door latch # L3980 is easy to install and has a rustproof finish. This handle will work on doors up to 1-1/16 inches thick and can be locked...
    view full answer...

  • Availability of 5th Wheel Goose Neck Adapter With 2-Inch Ball
  • All of the 5th-wheel-to-goose-neck adapters we offer, such as the Reese # RP58079, Curt # 16055 and the Husky # HT31368 feature a standard goose neck 2-5/16-inch hitch ball. We do not offer this type of adapter with a 2-inch ball.
    view full answer...

  • Available Safety Chain Hooks to Connect Chains to a Curt Gooseneck Ball and Hook Set
  • I recommend upgrading both the chains and hooks on your trailer, like # 49150. Without knowing the capacity of your current chains, picking a replacement hook with the matching weight capacity will be impossible. Replacing the whole chains set will be the best option. I have attached a link that will take you to our safety chain product page. Once you know what weigh capacity chain and hook you are needing for your horse trailer you can choose one from this page.
    view full answer...